دستگاه عیب یاب التراسونیک سوناتست مدل D10 & D20

Specifications

Test Range: 5mm (0.2in) up to 5,000 mm (200 in.) in steel.
Variable in sequence 10mm or 1mm.
Velocity: 1000 - 9999 m/s.
Probe Zero: 0 to 999.999 μs.
Delay: 0-5,000m at steel velocity in 0.05 steps (0-200 in 0.002 in. steps)
Gain: 0 to 110dB in 0.5, 1, 2, 6, 10, 14 and 20dB steps.
Test Modes: Pulse echo and transmit/receive.
Gate: Start & Width adjustable over full range. Amplitude 0-100%,0.5% steps visual and audible alarms. Positive triggering.
Measurement Modes
Depth: Depth and amplitude of first signal in gate.
Echo-Echo:Echo-to-Echo distance measurement; (single gate).
Flank to Flank, Automatic Gate 2 positioning.
Trig:Trigonometric display of beam path, depth and surface distance.

 Calculation of skip depth and curved surface compensation, Xoffset for transducer.
T-Min :Holds minimum thickness in depth mode.
Pulser Voltage: Spike - 200 Volt peak amplitude, rise/fall time «10ns into 50 ohm.Fixed 20nS spike width.
P.R.F: Selectable 35 to 500 Hz, in 5Hz steps.
Display: Colour Transflective TFT: Display area 116.16 x 87.2 mm (4.57 x3.43 in). A-Scan Area 610 x 400 pixels max sunlight viewable.
Screen Update Rate: 50 or 60Hz.
Rectification :Full wave, positive, negative, RF.
Frequency Bands: Broadband 1.0 - 15MHz - 3dB.
Vertical Linearity: Vertical = 1% Full Screen Height (FSH).

Amplifier Linearity: ± 0.1dB.
Horizontal Linearity: 0.33% Full Screen Width (FSW).
Reject:50%. (LED warning light when selected).
Units:Metric (mm) or inch (in).
A-Scan Memory: 5,000 waveforms.
Panel Memory : 100 stores for calibration settings.
Thickness Logging :Storage for 100,000 thickness readings configured either by Block/Location/Number mode or alphanumeric pre-programmable worksheets. Readings can be exported to MS Excel using optional SDMS software.

USB:For connection to PC & printer.
Video:Composite video (PAL & NTSC)
Transducer Sockets:BNC or LEMO1 (factory option)
Battery: Lithium Ion 14.4V. Minimum 9.5 hours use, typically 12 hours,maximum 18 hrs indication of battery charge. Recharge time 3 hours. Battery can be charged separately.
Charger: 100-240 VAC, 50-60 Hz.
Environmental: Meets IP67
Temperature:Operating -10oC to 55oC (14oF - 131oF).
Size:H172mm x W238mm x D70mm (6.77in x 9.37in x 2.75in).
Weight:1.7kg (2.4lbs) with battery.
Warranty: 1 year.
Calibration Standar EN12668.


دستگاه عیب یاب التراسونیک سوناتست مدل D10 & D20 ساخت کمپانی سوناتست می باشد. لطفاً توضیحات محصول را مطالعه فرمایید و در صورت نیاز به اطلاعات بیشتر و آگاهی از قیمت دستگاه لطفاً تماس بگیرید.
کمپانی سازنده :سوناتست (Sonatest)کشور سازنده :انگلستان
مدل دستگاه :D10 & D20

سوناتست ، دستگاه عیب یاب التراسونیک ، دستگاه التراسونیک sonatest ، ut ، flaw detector ، sonatest flaw detector ، sonatest d10 ، sonatest d20 ، sitescan ، sitescan d10 ، sitescan d20 ، d10 ، d20